BROWN OR RED!
NEUTRAL!
BLUE OR BLACK!
25mm!
8mm!
EARTH!
GREEN OR YELLOW / GREEN!
40mm!
8mm!
LIVE!
8mm!
12mm!
Wiring instructions
THIS APLIANCE MUST BE EARTHED.
ANY WORK CARRIED OUT MUST BE
DONE BY A QUALIFIED ELECTRICIAN
Prepare all 3 wires using trimming template
Loosen cord grip
Wire in the sequence: Neutral – Live – Earth
Ensure terminal screws are tight
Fit 13 amp (Brown) fuse
Tighten cord grip onto cord before
replacing cover
Cleaning and Maintenance
IMPORTANT
– Always allow the baker to cool and unplug it at the socket
before cleaning or maintenance.
DO NOT
use abrasive or corrosive materials on any of the baker surfaces,
warm soapy water and a soft cloth should be sufficient to remove any stains.
DO NOT
submerge the baker in water or use any water jets to clean it.
The oven interior may be cleaned with a stainless steel oven cleaner, please
follow the cleaner instructions carefully.
CHANGING BULBS
Disconnect oven from electricity supply.
The display oven and main oven bulb is a 25w G9 Halogen Capsule which
can be obtained from most electrical retailers:
Lever off the glass cover and replace the broken bulb.
Bulb life varies greatly and we are unable to guarantee their lifespan, bulbs,
fuses, glass, door seals and mains flex are not covered by guarantee.
