background image

SPECIFIC SAFETY INSTRUCTIONS 

FOR AIR CLEANERS

1. 

FOR YOUR OWN SAFETY, READ 

INSTRUCTION MANUAL BEFORE 
OPERATING. 

Learn the tool’s application 

and limitations as well as the specific 
hazards peculiar to it. 

2. 

DO NOT ATTEMPT TO REMOVE OR 

REPLACE THE FILTER(S)  WHILE 
THE MACHINE IS IN OPERATION. 
MAKE SURE AIR CLEANER IS           
DISCONNECTED FROM THE POWER 
SOURCE. 

3. 

DO NOT OPERATE THE AIR      

CLEANER WITHOUT THE FILTERS IN 
PLACE TO AVOID EXPOSURE TO 
ROTATING PARTS AND              
OVERLOADING THE MOTOR. 

4. 

THE USE

 of filters and attachments 

which are not recommended may result 
in product damage or the risk of          
personal injury. 

5. When suspending the Air Cleaner from 

the ceiling 

MAKE CERTAIN 

the       

hardware is securely anchored into a 
wood structure. Always keep a minimum 
of 7 feet between bottom of Air Cleaner 
and the floor surface to allow for           
adequate head clearance. Also, use only 
properly sized chain to prevent the tool 
from falling. 

6. 

TO REDUCE THE RISK OF              

ELECTRICAL SHOCK,

 do not expose 

to water or rain, and do not lift the Air 
Cleaner by the power cord. 

DO NOT 

use the power cord as a hanging device. 

7. When used in the portable application, 

MAKE CERTAIN

 the Air Cleaner is     

adequately supported, or securely 
clamped to the work surface to eliminate 
any potential for movement or damage 
from falling. 

8. 

ALWAYS WEAR ADEQUATE EYE   

PROTECTION. 

9. 

WHEN NOT IN USE, BE CERTAIN TO 

STORE AIR CLEANER IN A SAFE 
LOCATION TO ELIMINATE THE 
POTENTIAL OF DAMAGE TO THE 
POWER CORD OR TRIPPING           

HAZARDS. 

10. 

MAKE WORKSHOP CHILDPROOF 

by 

unplugging tools from power source, 
using padlocks, or by using a master 
switch. 

11. 

MAINTAIN TOOLS IN TOP               

CONDITION. 

Keep filters clean for      

optimum  performance. Follow       
instructions for changing and cleaning 
filters. 

12. 

DANGER: DO NOT

 use this machine 

to filter any metal dust. Combining 
wood and metal dust can create an 
explosive hazard. This Air Cleaner is 
intended to be used to filter non- 
explosive atmospheres only. 

13. 

IF YOU ARE NOT 

thoroughly familiar 

with the operation of the Air Cleaner, 
obtain advice from your supervisor, 
instructor or other qualified person. 

14. 

WARNING: DO NOT 

operate your Air 

Cleaner until it is completely        
assembled and installed according to 
the instruction manual. 

15. 

PLACE POWER CORD IN A SAFE 

LOCATION TO ELIMINATE         
TRIPPING HAZARDS. 

16. 

USE FACE OR DUST MASK AND 

EYE PROTECTION. WARNING: 

The 

dust generated by certain woods and 
wood products can be hazardous to 
your health. Always operate machinery 
in  well-ventilated areas and provide 
for proper dust removal. 

17. 

WARNING: TO AVOID A             

POTENTIALLY DANGEROUS         
SITUATION, DO NOT USE AIR 
CLEANER TO DISSIPATE FUMES 
OR SMOKE. 

This Air Cleaner is 

intended for use in non-explosive,       
non-metallic atmospheres where only 
dry airborne dust is present. 

18. 

SAVE THESE INSTRUCTIONS. 

Refer 

to them frequently and use them to 
instruct other users.

Summary of Contents for KAC-410







Reviews: