ELECTRICAL & TECHNICAL
INFORMATION
ELECTRICAL INFORMATION
WARNING!
ALL ELECTRICAL CONNECTIONS MUST BE DONE BY A QUALIFIED ELECTRICIAN
. FAILURE TO COMPLY MAY RESULT IN SERIOUS
INJURY! ALL ADJUSTMENTS OR REPAIRS MUST BE DONE WITH THE METAL LATHE DISCONNECTED FROM THE POWER SOURCE.
FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY!
POWER SUPPLY
WARNING:
YOUR METAL LATHE MUST BE CONNECTED TO A 120V, 15-AMP. DEDICATED BRANCH CIRCUIT AND USE A 15-AMP TIME
DELAY FUSE OR CIRCUIT BREAKER. FAILURE TO CONNECT IN THIS WAY CAN RESULT IN INJURY FROM SHOCK OR FIRE.
THIS METAL LATHE MUST BE GROUNDED
. IF NOT PROPERLY GROUNDED, THIS METAL LATHE CAN CAUSE ELECTRICAL SHOCK,
PARTICULARLY WHEN USED IN DAMP LOCATIONS. TO AVOID SHOCK OR FIRE, IF THE POWER CORD IS WORN OR DAMAGED IN
ANY WAY, HAVE IT REPLACED IMMEDIATELY. If your metal lathe should malfunction or breakdown, grounding provides a path of least
resistance for electric current, to reduce the risk of electric shock. This metal lathe is equipped with a cord having an equipment-grounding
conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
WARNING:
TO MAINTAIN PROPER GROUNDING OF YOUR METAL LATHE, DO NOT REMOVE OR ALTER THE GROUNDING PRONG IN
ANY MANNER.
TECHNICAL INFORMATION
Main Specifications
Max. swing over bed ......................................................................................................................................................................10” (254mm)
Max. swing over cross slide ............................................................................................................................................................6” (156mm)
Distance between centers ..............................................................................................................................................................22” (560mm)
Headstock
Spindle bore diameter ........................................................................................................................................................................1” (26mm)
Spindle bore taper ....................................................................................................................................................................................MT#4
Spindle speed range ............................................................................................................................................................6 (150-2400 RPM)
Gear Box
Thread cutting: ........................................................................................................................................................Inches- 24 kinds (8-72 TPI)
....................................................................................................................................................................Metric- 18 kinds (0.25 - 3.5mm)
Tool Post, Saddle, Tailstock
Top Slide travel ..........................................................................................................................................................................4-1/4” (107mm)
Cross Slide travel ......................................................................................................................................................................6-3/8” (161mm)
Tailstock taper ............................................................................................................................................................................................MT#3
Tailstock quill travel ......................................................................................................................................................................2-1/2” (65mm)
Diameter of Tailstock quill ............................................................................................................................................................1-1/4” (32mm)
Motor
Horsepower ................................................................................................................................................................................................1 HP
Voltage ........................................................................................................................................................................................120V, 1 phase
Amperage ..............................................................................................................................................................................................12 Amp.
Motor RPM ........................................................................................................................................................................................1720 RPM
Motor frequency..........................................................................................................................................................................................60Hz
