background image

WARRANTY INFORMATION

1-YEAR 

LIMITED WARRANTY

FOR THIS GAS 10 GALLON AIR COMPRESSOR 

KING CANADA TOOLS

OFFERS A 1-YEAR LIMITED WARRANTY

FOR INDUSTRIAL USE.

IMPORTANT WARRANTY INFORMATION

KING CANADA AIR COMPRESSOR SERVICE INFORMATION

IF YOU ARE EXPERIENCING PROBLEMS WITH ONLY THE AIR COMPRESSOR, DO NOT RETURN TO THE
RETAILER,  CALL KING CANADA AT THE TOLL-FREE NUMBER BELOW FOR SERVICE INFORMATION.

TOLL FREE: 1-877-636-4214

HONDA ENGINE SERVICE INFORMATION

IF YOU ARE EXPERIENCING PROBLEMS WITH THE HONDA ENGINE, DO NOT RETURN TO THE RETAILER,
CONTACT HONDA CANADA, INC. BY PHONE OR THROUGH THEIR WEB SITE FOR SERVICE INFORMATION.

TOLL FREE: 1-888-9HONDA9 (946-6329)  or WEB SITE: www.honda.ca

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

REPLACEMENT PARTS- AIR COMPRESSOR COMPONENTS ONLY (NOT ENGINE)

Replacement parts for the air compressor components only are available at our authorized King Canada service centers across
Canada. 

LIMITED TOOL WARRANTY

King Canada makes every effort to ensure that this product meets high quality and durability standards. King Canada warrants to the
original retail consumer a 1-year limited warranty as of the date the product was purchased at retail and that each product is free from
defects in materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse, normal wear and tear, negligence
or accidents, repairs done by an unauthorized service center, alterations and lack of maintenance. King Canada shall in no event be
liable for death, injuries to persons or property or for incidental, special or consequential damages arising from the use of our products. 

To take advantage of this limited warranty, return the product at your expense together with your dated proof of purshase to an
authorized King Canada service center. Contact your retailer or visit our web site at www.kingcanada.com for an updated listing of our
authorized service centers. In cooperation with our authorized serviced center, King Canada will either repair or replace the product if
any part or parts covered under this warranty which examination proves to be defective in workmanship or material during the
warranty period.

NOTE TO USER

This instruction manual is meant to serve as a guide only. Specifications and references are subject to change without prior notice.

PARTS DIAGRAM & PARTS LISTS

Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.

KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4

www.kingcanada.com

Summary of Contents for KC-5510G1









Reviews: