50
The functions of SET key:
I. To enter into the product parameters setting operation, thus
entering the corresponding interface, for time adjustment,
standard pressure value setting, temperature warning value
setting, transmitter replacement and tires rotation;
II. When the system alerts, press SET key to turn on and off
the sound. If the problem in tire still exists, the beeper will
alert again when you restart ACC or 20 minutes later after
turning off.
III. Under normal state, the cycle-cycle stopping display can
be changed over; however, many tires warning cycle displays
can not be stopped.
The function of left and right direction keys:
I. Under the normal state, you can press direction key to
browse the tires'information quickly.
II. Under the system setting state, the upper and lower
interfaces can be changing-over or the upper and lower
parameters can be changed.
10.2 System Setting
Long-pressing the SET key for over 5s can enter the setting
state. First there enters the Year setting state. If short-press the
SET key each time, the setting state can be changed over as
follows: Year setting-Month setting-Date setting-Hour setting
-Minute setting-Wireless code-Tire rotation-Pressure setting
-Warning temperature setting. Under the different setting
state, the corresponding value can twinkle. After the
completion of system setting, long press the SET key for five
seconds to exit the setting state and return the normal display
state. Under the normal display state, short-press the left and
right direction keys to change the pressure and temperature
values of tires.
A. Year Setting
After the product is electrified, the normal display interface
first occurs, to display the pressure and temperature of
corresponding tires. Long-pressing the SET key can enter the
Year display interface, as shown in following Figure. The
current year is as the starting year in the display system. The
last double digits can twinkles in turn, with the year value
increasing or decreasing through pressing the left and right
direction keys. The total of 15 years from 2009 to 2024 is as
the setting period.
B. Month Setting
Short-press the SET key again on the Year setting
interface, to enter into the month setting interface as
shown in the following figure, thus the month value
twinkles and can decrease or increase via the direction
keys;
C. Date Setting
Under the month setting interface, short-press the SET
key again to enter into the date setting interface. The
month value will show constantly and the date value
will twinkle and can increase or decrease via the
direction keys. The value adjustment has the
automatically identification function, which can
automatically identify the number of days of leap year,
leap month and smaller and larger months.
D. Hour Setting
Under the date setting interface, short-press the SET key
to enter into the hour setting interface, as shown in the
following figure, thus the hour value twinkles and can
increase or decrease via the direction keys;