53
High-pressure alarm occurs at
left front wheel position
Attention
When the High Temperature Warning occurs, please do not
cool the tire with cold water but pull the vehicle over to the
shade to make tire cool down before driving.
E. Leakage Warning
If the tires quick-leakage is detected, the display unit will
give the Leakage Warning:
①
Leakage icon appears;
②
The digits of pressure value twinkle;
③
Warning sound
“Di-Di”. Warning will hold on until the problems are
corrected.
Quick-leakage alarm occurs
at the left front wheel position
F. Transmitter Malfunction Warning
If the display does not receive data properly from a
transmitter in 20 minutes, the system will detect it and
show “---” in the corresponding position on the display.
No-code module alarm occurs
at the left front wheel position
G. Wireless code-connection and standard
value setting
Under minute setting interface, short-press SET key to
enter into transmitter wireless code-connection state.
Both the pressure and temperature values are blank at
this time. Press the direction key to select the tires to be
re-set. Through pressing SET key, switch among
wireless code-connection/tire rotation, tire standard
pressure value setting and temperature warning value
setting.
H. Multi-warning of One Tire
When a tire have multi-problem occurs, the system will
give multi-warning:
①
Abnormality icon] appears;
②
Leakage icon appears;
③
The digits of pressure value
twinkle;
④
The digits of temperature value twinkle;
⑤
Warning sound “Di-Di”. Warning will hold on until
the problems are corrected.
Pressure interface display if the lowpressure alarm,
quick-leakage alarm and high-temperature alarm occur
simultaneously at the left wheel position
I. Multi-warning of Many Tires
If the multi-warning occurs for many tires, the system
will display the data received from each circularly on the
interface. The user can view them by pressing the key.
The warning sound “Di-Di” will stop until all problems
are corrected.