89
Tire transposition diagram(three axles)
8. Adjustment of the brake pedal free play
Loosen locknut of brake pedal push rod and adjust adjusting nut, and then measure the vertical distance from
pedal free position to the position where pressing resistance increases apparently when depressing pedal. The
value should be between 8mm and 12mm. After adjustment, lock the locknut.
9. Bus cleaning
•
Don’t pollute the environment when washing vehicle at washing shop.
•
Be careful to use the high strength dissolve fluid.
•
Don’t damage paint layer.
•
Do not directly inject the water into radiator grill on right (left) back of the bus to prevent the water from
entering engine through the air filter.
•
Don’t pour water onto electrical equipment in order not to damage it.
