Vehicle Starting and Driving
S-27
Engine start up and shut down in the engine compartment
Park the vehicle and activate the parking brake.
Put the gear box lever or the automatic transmission
selector in neutral (dead point).
If the transmission is in gear position, the start up with in
the engine compartment will not work.
Turn the ignition key to gear position, without activating
engine start up.
Engine start up
Press the start up switch (start) and activate the back
cover course end switch bar in the engine compartment.
Loosen the switches immediately the engine begins
running.
When the engine is turned on by way of the start up
switch in the engine compartment, this switch should be
used as a manual accelerator.
With the engine compartment cover open, the start up by
way of the ignition key is impossible.
Engine shut down:
Press the shut down switch (STOP).
To make the engine turn without starting up:
Press the engine start up and shut down buttons
simultaneously.
Note: the final placement of the switches in the engine
compartment is the responsibility of the vehicle body
manufacturer.
Model 1
Model 2
Model 3
Summary of Contents for XMQ6120C series
