Pages 20 Total 58
Shenzhen King Pigeon Hi-Tech Co.,LED
Ver 1.2
PLC Data acquisition protocol conversion gateway
-D225
the device is used as the server.
3.The serial port selection of the device link should be consistent with the PLC connection serial
port and the serial port selection of the serial port setting
4.2.5
Server Configuration
Server Configuration
Item
Description
Default
Server IP/domain
name
The IP or domain name of the target server
blank
Port number
Port number of target server
blank
Register package
The registration handshake protocol package of
the target server
blank
Register
response
package
If set after the device sends the registration
package, the server needs to return a response
packet to the device within 3 seconds, otherwise it
will send the registration package according to the
"reconnection times". If the number of sending
times is reached, it will be offline, counted as one
offline. Then it will reconnect immediately,
continue in sequence, and then execute the time
to connect to the server again in accordance with
the "dropped 3 times, reconnect time".
blank
Heartbeat
package
After setting, the device will send heartbeat
packets at intervals according to the heartbeat
packet time
Blank
Heartbeat
response packet
If set, after the heartbeat packet is sent, wait for
the server response time to be the set heartbeat
time. If it times out, the heartbeat packet will be
sent according to the "reconnection times". If the
number of sending times is reached, it will be
Blank
