Page 13 of 17 King Pigeon Hi-Tech. Co., Ltd. Page 13 of 17 Ver 1.1 File No.:KPA1010
A Professional GSM Alarm System designer and manufacturer!
GSM SMS Controller System &GSM House Alarm System&
GSM Elderly Guarder & GPRS Telemetry Data Logger.
Http://www.GSMalarmsystem.com
PIR Motion Curtain Motion and Ceiling motion detector are the detection areas.
Wireless
PIR
Motion
Detector
PIR
100A
Wireless
Dual
Element
PIR
Motion
Detector
PIR
100B
Wireless
Curtain
PIR
Motion
Detector
CPIR
100A
Wireless
Ceiling
PIR
Motion
Detector
CPIR
100B
7.2 Add the Wireless Detectors to 24-Hour zones of the Control Panel.
When the Control Panel in the learning mode, switch the
Switch5
from OFF to ON, then trigger the Wireless
Detector(Usually wireless gas leakage detector and wireless smoke detector with Test button, press the Test
Button can activate the wireless detectors.), the Control Panel will learn the code from the wireless Detector
automatically. When alert by long “Di----” sounds, means the wireless Detector was learned to the Switch5
Position,
please switch the switch back to OFF.
If alert by “Di Di” two sounds, then means the operation
failure, please switch it back to OFF then retry again.
Switch the Switch6, Switch7 from OFF to ON one by one to learn the 2nd, 3
rd
Wireless Detectors to the Control
Panel.
Wireless
Gas
Leakage
Detector
GL
100
Wireless
Gas
Leakage
Detector
GL
100A
Wireless
Smoke
Detector
SM
100
Notice:
The Wireless Gas Leakage Detectors and Wireless Smoke Detectors with PT2262 fixed IC code, please setup its wireless code
by use some Jumpers to configured it randomly is ok, see below:
1) Prepare the wireless gas leakage detector or smoke detector, removing the back cover carefully;
2) Locate the IC boards black jumpers, labeled A0-A7 and D0-D3, please see below figure.
3) Configured the A0~A7 and D0~D3 different from each wireless detectors. If configured the A0~A7 and D0~D3 are the same,
