Page 15 of 55
King Pigeon Hi-Tech. Co., Ltd.
Ver 1.3
GSM/SMS/GPRS/3G/4G
Cellular IoT Gateway
Modify Password:
This is for modifying the RTU’s Password, default is 1234.
Synchronous machine time:
This is to setup the RTU’s time for daily report or other timers. After click
Write the RTU Time, the RTU will be synchronous the same time as the PC. If connect to King Pigeon Cloud
Server, no need this step.
Device ID:
Non-necessary. This is mainly for monitoring center to identify the RTU;
If communicate via Modbus protocol, device ID only can be 1~247.
Device Description:
This is the description of the RTU, e.g.: installation address,
usage instructions and so on.
Add Timestamp to alarm SMS:
Tick it stands for while alarm occurrence, the Alarm SMS
will include the RTU’S current time information at the SMS Content.
Arm automatically when power on:
Tick it stands for once the RTU powered up, the RTU
will enter into Arm Mode automatically.
Auto Arm after disarmed:
Fill the timeout to enter into Armed Mode automatically after
disarmed operation. This is useful for security protection applications.
Tips:
Arm:
Under this mode, any alarm occurrence will send SMS and dial the authorized numbers immediately. And execute the
programmed I/O outputs.
Disarmed
: Under this mode, alarm occurrence will not send SMS & dial the authorized numbers.
Timer Reporting SMS Content Settings:
Tick the related items to add its value/status to the
Timer report SMS contents.
Alarm SMS Content Settings:
Ticks the related items to add its value/status to the Alarm
SMS Contents.
Number Settings
This is to setup the Authorized User Telephone Numbers to receive the Alarm SMS or dial. Tick it stands for
while the related event alarm occurrence will send SMS to this number.
Reminder:
Please remember that click "Save" button to save it after parameter be written, below pages are the same.