Trouble Shooting:
If these instructions do not resolve the problem, please discontinue use and
contact the store where you purchased the jump starter.
Problem
C ause
Solution
The power level
indicator shows 100%,
but the device has not
fully charged
Nothing happens
when I press the
power switch
When the four indicator lights are on, it
means the charging process can be
stopped. This situation is a semi-charge
which protects the device when in storage
or out of use for a long period of time.
The device has entered low voltage
protection mode and cannot be switched
on.
Unplug the charging
cable and then
reinsert it.
Insert the charging
cable into the 12V 2A
charge port to
activate the device.
Warning:
1. For safety reasons, after starting the vehicle, please disconnect the device
immediately.
2. For safety reasons, do not disconnect the two clamps while they are
connected to the device and the device is switched on.
3. For safety reasons, do not dismantle the device.
4. If the device has been dismantled, the warranty is invalid.
No not use this device in the bathroom, in other damp places, or near water
Do not modify or dismantle this device
Keep this product out of the reach of children
Do not inverse the output and input connections
Keep product away from fire
Do not use a charger with a higher voltage than that specified on the product
you wish to charge
Only charge this device in an area with a temperature between 0°C and 40°C
Do not hit or throw this product
Please contact your dealer if there is a problem when charging
Keep this product away from flammable objects (e.g. beds or carpets)
If the liq uid contained in this device gets into eyes, do not rub eyes but rince
immediately with clean water
If this product gets hot or discolours, please discontinue use immediately.
Risk of leaks, smoke and burns
When storing, or not using this device for long periods, please make sure to
charge and discharge the device every three months.
Nothing happens
when I press the
power switch
The device has entered low voltage
protection mode and cannot be switched
on.
Insert the charging
cable into the 12V 2A
charge port to
activate the device.
Warning:
1. For safety reasons, after starting the vehicle, please disconnect the device
immediately.
2. For safety reasons, do not disconnect the two clamps while they are
connected to the device and the device is switched on.
3. For safety reasons, do not dismantle the device.
connected to the device and the device is switched on.
3. For safety reasons, do not dismantle the device.
4. If the device has been dismantled, the warranty is invalid.
No not use this device in the bathroom, in other damp places, or near water
Do not modify or dismantle this device
Keep this product out of the reach of children
Do not inverse the output and input connections
Keep product away from fire
Do not use a charger with a higher voltage than that specified on the product
you wish to charge
Only charge this device in an area with a temperature between 0°C and 40°C
Do not hit or throw this product
Do not use a charger with a higher voltage than that specified on the product
Do not use a charger with a higher voltage than that specified on the product
4. If the device has been dismantled, the warranty is invalid.
No not use this device in the bathroom, in other damp places, or near water
Do not inverse the output and input connections
Warning:
1. For safety reasons, after starting the vehicle, please disconnect the device
immediately.
2. For safety reasons, do not disconnect the two clamps while they are
connected to the device and the device is switched on.
3. For safety reasons, do not dismantle the device.
4. If the device has been dismantled, the warranty is invalid.
No not use this device in the bathroom, in other damp places, or near water
Do not modify or dismantle this device
Keep this product out of the reach of children
Do not use a charger with a higher voltage than that specified on the product
Do not use a charger with a higher voltage than that specified on the product
3. For safety reasons, do not dismantle the device.
connected to the device and the device is switched on.
3. For safety reasons, do not dismantle the device.
4. If the device has been dismantled, the warranty is invalid.
No not use this device in the bathroom, in other damp places, or near water
Do not modify or dismantle this device
Keep this product out of the reach of children
Do not inverse the output and input connections
Do not use a charger with a higher voltage than that specified on the product
