Page 13
Each signal booster is individually tested and factory set to ensure FCC
compliance. The signal booster cannot be adjusted without factory
reprogramming or disabling the hardware. The signal booster will amplify, but not
alter incoming and outgoing signals in order to increase coverage of authorized
will reduce gain until a signal is detected. If a detected signal is too high in a
frequency band, or if the signal booster detects an oscillation, the signal booster
the signal booster will automatically resume normal operation after a minimum
momentarily removing power from the signal booster. Noise power, gain, and
linearity are maintained by the signal booster’s microprocessor.
This device complies with Part 15 of FCC rules. Operation is subject to two
device must accept any interference received, including interference that may
weBoost could void the authority to operate this equipment.
SPECIFICATIONS
