KING AMBROSIA P 2386, Instruction Manual

Switching attachments:

The steps needed to switch attachments are the same for the epilation and the shaving 

attachment:

Hold the device with one hand and press the unlocking button 4 located on the upper 

right device edge.

This releases the attachment, which now can be removed from the device using your 

other hand.

Press this button as well to attach  the epilation attachment

Make sure the 4 hooks at the bottom side of the attachments point to the left.

Release  the  unlocking  button. The  attachment  should  now  be  seated  firmly  on  the 

device.

Directions For Use

Perfect Angle Guide (PAG)

We strongly recommed using the PAG for your first few epilations. The PAG will keep 

you in the perfect epilating angle, for the best hair removal results. Using the PAG, you 

will  be  able  to  epilate  all  unwanted  hair  more  quickly  and  efficiently.  It  is  specially 

designed for this unit.

To switch device on:

■ 

Remove safety cap 1 from epilation attachment.

■ 

Slide the ON/OFF switch 5 up to switch the device on.

■ 

Level 1 (slower speed) for especially sensitive or difficult to reach body areas.

■ 

Level 2 (higher speed) for quicker epilation on larger, less sensitive areas (e.g. legs, 

arms).

Risk of injury:

 Particular care should be taken when used on

sensitive areas of the body (bikini line, armpits, etc.).

1.

Wash your legs thoroughly with warm water and

 soap to provide the best starting conditions for 

depilating.

2.

 Do not apply any body lotion or other substances, 

such as for example shaving foam, which might 

obstruct the epilator.