Page 14
SAFETY GUIDELINES
damage your equipment.
The signal booster unit is designed for use in an indoor, temperature-controlled
environment (less than 150 degrees Fahrenheit). It is not intended for use in attics or
similar locations subject to temperatures in excess of this range.
The desktop antenna must have at least 3 feet of separation distance from all active
separation distance from all active users.
Connecting the signal booster directly to the cell phone with use of an adapter will damage
the cell phone.
from all persons.
meters) above ground.
This is a CONSUMER device.
BEFORE USE,
you
MUST REGISTER THIS DEVICE
with your wireless provider
and have your provider’s consent. Most wireless providers consent to the use
of signal boosters. Some providers may not consent to the use of this device on
their network. If you are unsure, contact your provider.
In Canada,
BEFORE USE
you must meet all requirements set out in ISED CPC-
You
MUST
cease operating this device immediately if requested by the FCC (or
ISED in Canada) or licensed service provider.
for calls served by using this device.
FOR MORE INFORMATION ON REGISTERING YOUR SIGNAL BOOSTER WITH YOUR
WIRELESS PROVIDER, PLEASE SEE BELOW:
Sprint: http://www.sprint.com/legal/fcc_boosters.html
T-Mobile/MetroPCS: https://support.t-mobile.com/docs/DOC-9827
