HP30
PROGRAMMING INSTRUCTIONS
ENERGY STAR
Technical support: (800) 603-5464 ext 111 / info@king-electric.com
SAVE THESE INSTRUCTIONS
TWO CIRCUIT CONTROL
Program
Temp.
Monday - Friday
Saturday
Sunday
Program
Mon-Fri Temp.
6:00am
8:30am
4:30pm
10:30pm
70°F
60°F
70°F
65°F
Temp.
Temp.
Return
Sleep
Leave
Wake
Return
Sleep
Leave
Wake
Time
Time
Time
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
:
:
:
:
:
:
:
:
:
:
:
:
Saturday-Sunday Temp.
7:00am
8:30am
4:30pm
10:30pm
70°F
70°F
70°F
65°F
Use or to set day of the week.
2
1
Turn switch to “
DAY”.
Set D
ay and Time
1
Turn switch to
“Mo-Fr”
(Monday - Friday).
1
2
Set To Run
Press to set first program-period
of weekday.
2
Turn switch to
“RUN”
to operate.
1
2
Press and together for 5 seconds.
3
Adjusting the Differential
Turn switch to
“TIME”
.
3
Use or to set hour and minute.
4
“ERR”
will show if no data
is input after 10 minutes. To
continue, turn switch to “RUN”
then back to previous position.
Use or to set time for .
3
4
Press to set temperature setpoint.
Use or to set temperature.
5
Pressing will alternate the display
between time and temperature settings
for all 4 buttons.
6
Press to set second program-period
of weekday.
4
Override Function
5
Your Schedule
Follow steps 3 - 5 to complete
programming.
7
8
Press to set third program-period
of weekday.
Follow steps 3 - 5 to complete
programming.
9
10
Press to set fourth program-period
of weekday.
Follow steps 3 - 5 to complete
programming.
11
Turn switch to
“SAT”
(Saturday).
12
Follow steps 3 - 5 to complete Saturday
programming.
13
Turn switch to
“SUN”
(Sunday).
14
Follow steps 3 - 5 to complete Sunday
programming.
15
3
Use either or to set differential.
The thermostat will memorize and use the
new setting after 5 seconds.
The thermostat will memorize and use the
new setting after 5 seconds.
4
This thermostat provides 2 manual temperature
overrides.
Turn switch to
“RUN”
.
1
TEMPORARY temperature change
Use or to change temperature setting.
2
The thermostat will memorize and use
the new temperature setting after 5 seconds or
until the next time-temperature begins.
3
To end the temporary override turn the switch
away from
“RUN”
then back.
4
PERMANENT on HOLD temperature setting
Turn switch to
“HOLD”
.
1
Use or to change temperature
setting.
2
The thermostat will use the new setting after
5 seconds until the user manually ends it.
3
To end the permanent on hold override turn
the switch away from
“HOLD”
to
“RUN”
or
“Key Lock”
.
4
Watts
250 to 2,500
2,750 to 3,500
3,750 to 5,500
5,750 to 7,700
Suggested
Differential
1°
2°
3°
4°
6
Display Options / TAP Display Button
Room Temperature / Day and Time /
Setpoint Temperature Alternating
1
Room Temperature Only / No Alterations
2
DISPLAY
7
Batteries
LCD display and relay are battery powered, not
charged by line voltage. One year life is expected.
1
Wake
Wake
OK
OK
Wake
Return
Sleep
Leave
Leave
Return
Sleep
2
“
BAT LO
” showing on the LCD indicates time to
replace the batteries.
Key Lock
This deactivates buttons on
the front panel. Temperature
can not be changed without
switching back to RUN.
H30-HP30 programming.ai : 5/07
Key Lock
Key Lock
Key Lock
Key Lock
Key Lock
Key Lock
Key Lock
Day
Day
Day
Day
Day
Day
Time
Mo-Fr
Sat
Sun
Hold
Run
Return
Sleep
OK
Leave
Wake
Reset
Wake
Leave
OK
Sleep
Return
Run
Hold
Sun
Sat
Mo-Fr
Time
Day
Reset
Time
Mo-Fr
Sat
Sun
Hold
Run
Return
Sleep
OK
Leave
Wake
Reset
Time
Mo-Fr
Sat
Sun
Hold
Run
Return
Sleep
OK
Leave
Wake
Reset
Time
Mo-Fr
Sat
Sun
Hold
Run
Return
Sleep
OK
Leave
Wake
Reset
Time
Mo-Fr
Sat
Sun
Hold
Run
Return
Sleep
OK
Leave
Wake
Reset
Time
Mo-Fr
Sat
Sun
Hold
Run
Return
Sleep
OK
Leave
Wake
Reset
Disp
CAUTION:
More than one circuit breaker
feeds this device. Turn both off before servicing.
