background image

Page 6

IMPORTANT! Do not power wash any part of the KING Jack antenna head or base mount.

LIMITED WARRANTY

Every new KING Jack HDTV Antenna System is thoroughly inspected and tested before leaving the factory, and is covered by the 

following two year parts and one year labor limited warranty from the date of original purchase:

 

•  Two year parts warranty: The customer is not responsible for the cost of replacement parts if the original part is determined to be 

defective under the terms of the warranty.  The customer is responsible for the cost of replacement parts after two years.

 

•  One year labor warranty: The customer is not responsible for labor costs to repair unit if unit falls under the terms of the warranty.  

Any warranty labor outside of that performed at the factory is not covered unless the product has been installed by an authorized 

dealer/installer or OEM manufacturer.  The customer is responsible for all labor costs after one year.

Should any trouble develop during the warranty period, contact KING.  You must contact KING before the warranty period expires.  The 

customer must supply proof of purchase (such as a dated sales receipt) when requesting warranty service.  If customer cannot supply 

proof of purchase, warranty period shall start 30 days after date of manufacture.

Only KING and certified dealers are authorized to perform warranty evaluations and repairs.  Depending upon the problem, KING may 

authorize the dealer to perform the necessary repairs, or may have the unit returned to KING for repairs.

A certified dealer must not perform any repair without first contacting KING for a Service Order Number.  KING will advise the dealer on 

how to proceed with any repairs.

If it is determined that the unit needs to be returned to KING, customer must return COMPLETE product, freight prepaid, to: 

KING, 11200 Hampshire Avenue South, Bloomington, MN  55438-2453

.

If inspection shows the trouble is caused by defective workmanship or material, KING will repair (or at its option, replace) without 

charge.

When returning product, KING will supply an RMA number (Return Merchandise Authorization).  This number must be clearly written 

on the box.  Failure to clearly write RMA number on box may result in delays in processing claim.  Along with product, customer should 

include in the box: his/her name, address, daytime phone number, proof of purchase and description of the problem.

This warranty does not cover installation and external wiring, or remanufactured units.  This warranty is not transferable from the 

original owner.

This warranty also does not apply where:

 

• The product has been abused, misused, improperly installed or improperly maintained.

 

• Repairs have been made or attempted by others that are not certified by KING to do such repairs.

 

• Repairs are required because of normal wear and tear.

 

• Alterations have been made to the product.

 

• The product enclosure has been opened without authorization.

 

• Damage has been caused by power washing.

 

• Circumstances beyond the control of KING cause the product to no longer operate correctly.

 

• Customer is not the original owner.

In no event shall KING be liable for any indirect, incidental, or consequential damages from the sale or use of the product.  

This disclaimer applies both during and after the term of the warranty.

 

KING disclaims liability for any implied warranties, including implied warranties of “merchantability” and “fitness for a 

specific purpose,” after the one year term of this warranty.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.  Some states do not 

allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.  

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

JACK and SureLock are registered trademarks of Electronic Controlled Systems, Inc.

KING, KING Jack and KING SureLock are trademarks of Electronic Controlled Systems, Inc.

Summary of Contents for OA8200 WHITE









Reviews: