VIP RECEIVERS
2. On the receiver remote, press
MENU
,
6
,
1
,
1
.
3. Highlight “Check Switch.”
Press
SELECT
on your remote.
NOTE: Some receivers may prompt you to select “Check Switch”
a second time to initiate the test.
Screen graphics may vary.
4. Make sure “SuperDISH”
and “Alternate” boxes
are
NOT
selected.
Not all receivers will display
a screen with options that
include “SuperDISH” and
“Alternate” boxes.
5. Highlight “Test.”
Press
SELECT
on your remote.
The receiver will perform a check switch test. This process can take a little
while so PLEASE BE PATIENT.
6. When test is complete, a screen similar to one on the next two pages should
appear. After screen verification, continue with check switch test procedure
steps 7-9 located after screen verification graphics.
Because receivers are always changing, screen graphics may vary.
