Shenzhen Kingbird network technology CO.,LTD
KB2000 Data Converter(for Internet)
5
3.3 COM parameters
Baud rate: The data transmit speed. User must set it same as PC or terminal
device which connected. The bard rate of KB2000 support from 300pbs to 115200pbs;
Data bits: In COM port asynchronous transmission, a group data real include data
digit. KB2000 support 5-8Bits data bits. Data bits must be set the same as the PC or
terminal device which connected. In general it is 8bits;
Verify: KB2000’s COM verify have three types: None, Even, Odd. User must set it
same as PC or terminal device which connected.
Stop bits: In COM port asynchronous transmission, a data digit to indicate the end
of this group data
.
KB2000 support one and two stop bits. User must set it same as
PC or terminal device which connected. In general the stop bits is 1bit;
Max MEM. Time: When KB2000 received data from COM port, it will go into the
buffer, if over Max MEM Time, and there are not next data come in, KB2000 will
transmit the data to the network.
Max MEM. Bytes: When KB2000 received enough length data from COM port,
KB2000 will transmit the data to the network. KB2000 will transmit the data to network
when it satisfies Max MEM. Time and Max MEM. Bytes in one of two conditions.
4
．
Operation and Management
Firstly user is advised to connect KB2000 with the same subnet through network
cable by Switch or HUB, and power on it, User can set KB2000.
User can Manage KB2000 with the program (NetConvertor.exe). NetConvertor
can manage all KB2000 in current subnet. It can search KB2000, view KB2000
parameters, set KB2000 and so on. The interface of the program as follow:
