unit. Please don’t remove or separate the water
supply tank and the main unit during use, or it may
cause water leak from the tank and result in electric
shock or fire.
Notice
(1)Before using the steamer for the very first time,
please let it run with a full tank of water, and add a
few drops of lemonade to the water to dispel
peculiar smell.
(2) Since the service life of the appliance may be
shorten depending on water quality, distilled water
or purified water is recommended. Do not mix the
water with any other substance, such as lotion,
aromatic oil, milk etc. Doing so may cause burns,
malfunctions, or shorten the life of the main
unit.The following types of water cannot be used
due to its high mineral content.
a.Tap water
b.Mineral water
c.Geothermal water
d.Acidulated water
e.Groundwater
f.Ionized alkaline water
(2)How to use the steamer
1.Plug in the plug into the power outlet properly to
connect the appliance with power supplies.
2.Press the power switch for once, the indicating
light is in blue.
3.The steam is released after about 15 seconds.
After 20 seconds the steam will achieve to a normal
degree. A UV lamp in the steam outlet will be on to
How to use
When the appliance is used for the first time, some
water may remain around the water supply tank.
This is residual water used for inspection in the
factory and doesn’t cause any sanitation problems.
(1)Preparation before use
1.Place the main unit on a flat surface. Place the
appliance on a flat, level and solid surface during
use, such as a desk, etc. When the appliance is
working, do not hold it in your hand. Do not lie down
to steam. If the appliance is not standing straight,
the water supply tank cannot supply water to the
main unit and there is no steam released.
2.Open the cover and remove the water supply tank
from the main unit. Unscrew and open the water
supply cap.
3.Fill the water supply tank with purified water and
screw the water supply cap. Please use a container
to fill for the water supply tank. Do not fill the water
supply tank under water faucet directly or fill water
from the steam outlet. After filling water for the water
supply tank, do not press the water supply cap, or it
may cause water leak from the tank and result in
electric shock or fire.
4.Wipe away any water on the surface of the water
supply tank.
5.Put the water supply tank toward the main unit
until it completely fits into the main unit. Water is
supplied to the main unit and water in the tank
decreases when the tank is attached to the main
