background image

Warning!

  The  stove  is  still  hot  in  the  following  time  after  the  fire  has  been 

extinguished. 

Recommended Fuels 

Fuels  vary  greatly  in  quality  and  performance.  Anthracite  is  an  approved  natural 
smokeless  fuel(  not  processed).  Sufficient  air  supply  and  above  average  fuelbed 
temperatures are required to maintain best performance for this fuel, therefore, we 
suggest  the  fuel  is  used  in  combination  with  other  approved  manufactured 
smokeless fuels as per the HETAS approved list. 
The  following  fuels  are  approved  in  closed  appliance  by  HETAS  Ltd.:    Coalite                                                     
Cosycoke 
Coalite Nuts                                            Pureheat 
Blazebrite                                                Supercoke 
Homefire                                                    Maxibrite 
Homefire Ovals                                        Newflame 
Phurnacite                                                Supacite 
Mixed Nuts                                                Fireglo Ovoids 
Ancit                                                          Dragonbrite 
Taybrite                                                    Anthracite Small Nuts 
Sunbrite Doubles                                    Wood Logs 
You should only use authorized smokeless fuels in smoke control areas . 

Warning! 

The  use  of  the  appliance  as  an  incinerator  and  the  uses  of  liquid, 

unsuitable and non recommended fuels are prohibited. 
If any difficulties and problems on fuel, consult your local approved fuel merchant. 
 

   

 
HETAS Ltd.- Telephone 01242 673257- www.hetas.co.uk 
Solid Fuel Association-Telephone 0800 600 000- www.solidfuel.co.uk 

Safety guidance 

FIRES  CAN  BE  DANGEROUS

-Do  use  a  fireguard  in  the  presence  of  children, 

the  elderly  or  the  infirm.  The  fireguard  should  be  consistent  with 
BS6539-Fireguards for use with solid fuel appliances. 

DO  NOT  OVERFIRE

-  overfire  can  be  dangerous.  If  any  part  of  the  stove  grow 

red, it shows overfire do occur. It means the use beyond its design capacity is not 
allowed,  and  you  should  keep  an  eye  on  how  it  is  burning  and  adjust  the  control 
accordingly; 

FUME EMISSION 

Emit  fumes  can  be  avoided  if  it  is  installed  and  operated  properly,  fumes  usually 
appear from operations of de-ashing and refueling. Constant fume must be boring.   
If fume emission does persist, then the following measures can be helpful: 

TM 

STOVES 

Summary of Contents for BSV-01SERIES














Reviews: