Handling
Necessary facilities must be available for loading, unloading and site handling.
Minimum of 2 persons is required for handling and a sack barrow is recommended,
always ensure you make the necessary precautions to avoid injury.
Fire Cement
Some types of fire cement are caustic and should not touch your skin. In case of
contact, wash immediately with plenty of water.
Metal Parts
Be careful of personal injury when installing or maintaining this appliance.
Other possible injuries
The stove contains no harmful materials, but if there is a possibility of using any
dangerous materials in the course of installation then please seek specialist
guidance and use appropriate protective equipment.
Important Warning!
This appliance must not be installed into a chimney shared with any other heating
appliance.
There must not be an extractor fan fitted in the same room as the stove as this can
cause the stove to emit fumes into the room.
INSTALLATION
Chimney
The chimney must be fitted in accordance with manufacturer’s instructions and
Building Regulations.
The chimney height and the position of the chimney terminal should conform to
Building Regulations and all local regulations, including those referring to national
and European Standards.
The chimney must be in good condition, and any cracks and obstructions are not
permitted. The diameter of the flue should not be less than 125mm and not more
than 200mm. If any of these requirements are not met, the chimney should be lined
by a suitable method.The chimney must be swept before connection to the any liner
or stove. We also recommend that the chimney be swept a second time within a
month of regular use after installation.Please consult your local dealer,if you have
any doubts about your chimney.
As a protective measure to ensure safer use of your stove, we always recommend
you use a Multifuel Liner within your chimney, if suitable.
Flue Draught
A flue draught ranged from 1.2mm to 2.5mm water gauge may keep the appliance
in good performance. If the flue draught exceeds 2.5mm, a draught stabilizer must
be installed in order to control the rate of burning and prevent overfire. You should
TM
STOVES
