EN
61
EN
In
more
detail...
FPCSP41-3
Technical specifications
>
Chain pitch
:
9,525 mm (0,375”)
>
Chain gauge
:
1.27 mm (0,050”)
>
Drive sprocket
:
6 teeth x 9.525 mm
>
Max. chain speed
:
21 m/s
Sound level
>
Sound pressure level L
pA
:
98.8 dB(A)
>
Uncertainty K
pA
:
3 dB(A)
>
Sound power level L
WA
:
1109.6 dB(A)
>
Uncertainty K
WA
:
2.5 dB(A)
>
Guaranteed sound power level L
WA
:
114 dB(A)
Hand arm vibration level
>
Front handle, a
front hv,eq
:
6.5 m/s²
>
Rear handle, a
rear hv,eq
:
6.0 m/s
2
>
Uncertainty K
:
1.5 m/s²
The sound values have been determined according to noise test code given in
EN ISO 11681-1, using the basic standards ISO 22868.
The noise figures quoted are emission levels and are not necessarily safe
working levels. Factors that influence the actual level of exposure of work-force
include the characteristics of the work room, the other sources of noise, etc. i.e.
the number of products and other adjacent processes, and the length of time
for which an operator is exposed to the noise. Also the permissible exposure
level can vary from country. This information, however, will enable the user of the
product to make a better evaluation of the hazard and risk.
Wear hearing protection! The sound intensity level for the operator may exceed
80 dB(A) and ear protection measures are necessary!
The declared vibration value has been measured in accordance with a standard
test method (according to basic standard ISO 22867) and may be used for
comparing one product with another. The declared vibration value may also be
used in a preliminary assessment of exposure.
This product may cause hand-arm vibration syndrome if its use is not adequately
managed.
WARNING!
Depending on the actual use of the product the vibration
values can differ from the declared total! Adopt proper measures to
protect yourself against vibration exposures. Take the whole work
process including times the product is running under no load or
switched off into consideration.
Proper measures include among others regular maintenance and care
of the product and application tools, keeping hands warm, periodical
breaks and proper planning of work processes.
MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd 61
3/2/22 11:36 AM