KI6680, Mini Fiber Inspection Probe User Manual
Revision 4 Date: 31/05/2018 Page 10 of 12
5.4. To Captured and Save Images on PC
Click on “Capture” button (see figure above) to capture and save images on PC using default or preferred
file names as described in the figure.
Alternatively, press
Image Capture Button
on instrument to capture and save images when connected in
WiFi mode. This button does not work when instrument is connected in USB mode.
6. Pass / fail Acceptance Guidelines
Proper guidance on pass/fail criteria is beyond the scope of this manual, since it is likely to vary significantly.
The Standard ISO/IEC14763-3 Testing of optical fibre cabling specifies requirements and visual standards
for connector end face inspection with a microscope.
The standard and common industry practices recommend the following pass/fail acceptance criteria:
•
Markings on the core or damage to the cladding close to the core are unacceptable.
•
Slight scratches and small pits on cladding, away from the core, are acceptable.
•
Cracks are not permitted in either core or cladding.
7. Eye Safety Precaution
While handling live fibers, always observe eye safety procedures compliant with your company policy,
relevant laser safety standards and safety practices.
8. Care of Your Instrument
This is a precision optical instrument. Keep it clean, dry and do not drop. Avoid exposure to moisture or
excessive vibration. When not in use, always
replace the dust cap to protect the instrument’s adaptor
or
adaptor head from accidental damages.
9. Service and Support
For assistance, please visit our web site
www.kingfisherfiber.com
for your local contact details, or for return
material instructions (RMA). Our application support or service team would be pleased to help.
