KI6680, Mini Fiber Inspection Probe User Manual
Revision 4 Date: 31/05/2018 Page 9 of 12
5.3. Imaging Software Operation
Double click on icon,
“
EasyGetWiFi
”
on your PC to start the imaging software. The main display below will
show up. Follow the steps below to connect instrument to software.
➊
For
WiFi mode
connection,
select “WiFi” from drop down
menu.
For
USB mode
connection, select
“USB” from drop down menu.
➋
Click to connect
instrument to software
Focused (by turning
Focus
Ring
on
instrument) end-face
image of inserted
fiber connector at
adaptor tip.
Adjust display brightness
Type in preferred file name here to save
captured image.
Note:
If no file name is typed in here, images will
be saved in the default file names which auto
increment after each image saving operation.
Select the directory to
save image files.
Disconnect instrument
from software
Click to capture and save
image.
Note: The Image Capture
Button on instrument only
works in WiFi Mode.
The saved images files
will be listed in this
area of the display.
“Increase”
box:
checked:
A preferred text filename will be appended with
number which auto increment after each image saving
operation.
unchecked:
Content of the preferred filename will be over
written with that of the last image saving operation.
