EN
NMBC1000
Getting
started...
Before you start
21
NOTE:
Take care of small parts that are removed during assembly or
when making adjustments. Keep them secure to avoid loss.
Pole assemble
1. Loosen the lock knob (11) anticlockwise (Fig. 1, step 1).
2. Align the lower pole (12) with the locking sleeve (11b) and insert it (Fig. 1,
step 2). Make sure the pin (11a) matches the bore (11c).
3. Make sure the pin (11a) snaps in place (Fig. 2).
4. Secure the connections with the lock knob (11) (Fig. 1, step 3).
3.
1.
2.
11b
11c
11a
12
11d
11
Fig. 1
Fig. 2
WARNING!
Make sure bolt (11d) and knob (11) are properly tightened
before using the product.
Cutter guard
1. Unscrew the nut (17d) clockwise
using the supplied socket spanner
(20) (Fig. 3, step 1).
2. Remove the locking flange (17c),
the backing flange (17b) and the
inner bushing (17a) from the spindle
(17) (Fig. 3, step 2).
3. Remove three bolts (15a) from the
gear head (15) by using the provided
multi-tool (21) and keep them handy
(Fig. 3, step 3).
4. Align the cutter guard (14) with the
gear head (15) (Fig. 4).
5. Make sure the guide pin (14b)
matches with the slot in the gear
head (15).
6. Secure the guard with the three bolts
(15a) by using the multi-tool (21).
1.
3.
2.
20
17d
17b
17a
15a
17
15
21
17c
Fig. 3
No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 21
10/20/21 12:02 PM
