HHO CARBON CLEANER 6.0 OPERATION MANUAL
10
3.3 Control Panel Introduction
(1) Front panel introduction
Pic-10
HHO carbon cleaner 6.0 control panel as showing in Pic-9, detail description as following.
No.
Name
Function
1
time display
display carbon cleaning time parameter
A1
high water level
the light on, when the water higher than high level, otherwise
the light will not be bright
A2
mid water level
the light on, when the water higher than mid level, otherwise
the light will not be bright
A3
low water level
the light on, when the water lower than low level, otherwise
the light will not be bright
B1
over water indicator
the light on, when solenoid valve broken and stop draining
off water
B2
add water indicator
the light on, when water lower than lowest set level.
machine stops.
B3
lack water indicator
the light on, when water lower than mid level.
machine stops.
C1
vibration indicator
the light on, when vibrating sensor works
C2
Power supply indicator
the light on, when turn on power switch
C3
over heat
the light on, when working temperature is over heat.
machine stops
C4
over pressure
the light on, when working pressure reaches 0.2mpa.
machine stops
2
gas production display
display the value of HHO gas production.(L/hr)
3
gas production adjustment
－
decrease gas output
4
gas production adjustment
＋
Increase gas output
