HHO CARBON CLEANER 6.0 OPERATION MANUAL
13
the lights of high level and mid level are not bright, you should turn off the machine, open the
machine over, add 4L water to the tank from the filling opening through funnel.
6.The Working Process of Carbon Cleaning
6.1- Add carbon cleaner agent (the machine doesn’t work without carbon cleaner agent)
6.2- Please make sure that the prepared work have done.
6.3- Please make sure the car in stationary state, have flamed out. Automobile cluch in park
sated and hand brake state, these will avoid car slide accidental. Once again confirm the
automotive fuel is enough for car running for 20 minutes at idling speed.
6.4- Open the front engine cover and make it reliable support.
6.5- To find out and confirm the vacuum tube ( it generally connected with the brake vacuum
pump), and disconnect it with the vacuum pump. As shown in the picture below ( take
TRITEC for example):
Pic-11
6.6- Connect the gas output tube of the HHO Carbon Cleaning Machine with the vacuum
tube of car, and lock it tightly. As shown below:
Pic-12