HHO CARBON CLEANER 6.0 OPERATION MANUAL
19
Annex2: Notice of using HHO Carbon Cleaning Machine
1. The machine adopts single phases 220V power supply, if the voltage does not
match or lack of phase, the machine cannot work properly.
2. The machine use carbon cleaning solution as working medium, other media are
prohibited. If you use other media, the machine can’t identify and will alarm to stop working.
And it will also cause damage to the machine.
3. The machine in the running process, if Adding Water Indicator shows green, after
finishing carbon cleaning, please add 4 Liter pure water to water tank of the
machine immediately.
During carbon cleaning process, if appear engine flameout, don’t re-start the engine,
please deal with according to operation introduction in Annex3. Details as following:
1
)
Turn off the Power Switch.
2
)
Use compressed air blowing the engine and air intake pipe to clean the remaining
Oxy-hydrogen gas.
4. In the processing of using, if the fan doesn’t work, will cause over heat indicator light or
over temperature indicator light on, at this time, we should find the reason cause the fan’s
failure. We should find out it is fan’s power input or internal circuit breaker that cause the
fan’s failure.
5. Don’t put stuff on the machine, please clean the dust regularly. You should
replace electrolyte for the electrolytic cell once every twelve month.