background image

2

WARNINGS & SAFETY INFORMATION

INCLUDED IN THE KIT

•  Keep the solar panel and controller away from liquids at all times. 

•  Keep the solar panel and controller clean and always check connectors for debris before 

connecting. 

•  This product is not intended to be used by children. In addition to this, adults with reduced 

physical or mental capabilities, or those who are under the influence of drugs or alcohol 

should not use the product. 

•  Only use the solar panel to charge 12v, rechargeable batteries. 

•  Lead acid batteries produce harmful explosive gases. The battery should be mounted in 

well-ventilated area, away from possible ignition sources. 

•  Take care when maneuvering & setting-up the Solar Panel as to not damage the unit. 

•  Never connect the Solar Panel directly (without a controller) to a battery or other load. 

•  Tampering or modifying the solar panel, controller or wiring will void warranty. 

• 

When transporting the solar panel, firmly secure the panel so that it will not move around or 

collide with other objects. 

•  Do not use the solar panel, controller or wiring if it is damaged or compromised in any way.

Summary of Contents for 250W










Reviews: