3
Adventure Kings Double Shower Tent
Packing Down
1. Remove all contents and make sure the tent is clean and dry.
2. Remove pegs from the base of the tent.
3. Remove the two stabilising poles.
4. Push any corner in towards the opposite corner to condense the walls to double
panels.
5. Fold the double panels together until you end up with a one panel flat unit.
6. With your hands about a quarter distance up each side of the now flat panel, lift
the base section to hip height. Lift your hands gradually together so the tent bends
to the ground about halfway. Once the top of the tent is touching the ground, move
your hands together in front of you so that the sides of the tent are touching. The
spring frame should be forming a loop shape.
7. While still holding the frame, cross your left hand under your right to gather on
loop section inside the other.
8. With the tent on the ground, tidy up the size of the loop so the tent can fit into the
bag, place tent in the carry bag.
