9
PART V
LAYOUT AND STORAGE
STORAGE
!
YOUR CABINET WAS DESIGNED TO STORE A MAXIMUM NUMBER OF BOTTLES SECURELY. WE RECOMMEND THAT YOU
OBSERVE THE TIPS BELOW TO OPTIMIZE LOADING.
1.
Disperse your bottles even so as not to concentrate weight in any one area. Also, be careful that your bottles do not touch either the
back of the cabinet or the step at the bottom.
2.
Also make sure that bottles are not all grouped together either at the top or bottom of the cabinet.
3.
A cooler that is full and has nice allowance for air movement will work more efficiently.
4.
Never try to adjust shelf with bottles still on it.
How to use your shelving
•
You can put the beer bottles on the shelving any way you like, lay down or upright.
•
Max Weight per shelf: 55 lbs ( 25kgs )
•
To adjust shelving, clips can be moved, place ‘top’ part of clip in first then force bottom part up. If clips seem loose, remove and
‘expand the width of opening on clip, this will allow it to fit better.
PLEASE NOTE
Before modifying your cabinet’s original configuration in any way, be sure to ask your dealer for advice.
7
DOOR LOCK
This unit comes with locks on all doors for preventative security.
The keys are located inside the plastic bag that contains the User Manual. To unlock the door, insert the key
into the lock and turn counterclockwise.
To lock the door, simply reverse the operation making sure the metal pin is engaged completely. Then remove
the key and place it is a secure place for safekeeping, one near fridge and one inside in safe location.
5-LAYOUT AND STORAGE
Your cabinet was designed to store a maximum number of bottles in total security. We recommend that you observe the
tips below to optimize loading.
-Spread your bottles out as evenly as possible over the shelves, so that weight is not concentrated in one point, Also
make sure your bottles do not touch the back of the cabinet wall, or the step at bottom.
-Make sure that bottles are not all grouped together at the top or bottom of the cabinet.
-A fridge that is full and has nice allowance for air movement will work more efficiently.
-Never try to adjust shelf with bottles still on it.
PLEASE NOTE
Before modifying your cabinet’s original configuration in any way, be sure to ask your dealer for advice.
How to use your shelving
You can put the beer bottles on the shelving any way you like, lay down or upright.
Max Weight per shelf: 25kgs
To adjust shelving, clips can be moved, place ‘top’ part of clip in first then force bottom part up.
If clips seem loose, remove and ‘expand the width of opening on clip, this will allow it to fit better.
