kingsley-bate Nantucket NT10, Assembly Instructions

KINGSLEY - BATE 

Fine Garden Furniture   

ASSEMBLY INSTRUCTION FOR THE NT - 10

   SEAT SECTION             LEFT END FRAME               RIGHT END FRAME 

* NOTE 

A  TENON 

B  MORTISE HOLE 

BOTTOM STRETCHER 

STEP-I

Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood. 

NOTE

:  During assembly  of furniture please m atch joints with the corresponding letter or 

numbers. 

STEP-II 

Fit  the BOTTOM STRETCHERS and 

SEAT  SECTION into the LEFT END 

FRAME  mortises.  If necessary, gently 

rock  the leg assem bly  while pushing 

tenons  into m ortises  until joints fit 

snugly.  Fit the RIGHT END FRAME 

mortises to the BOTTOM STRETCHERS and SEAT SECTION. 

STEP-III

Insert all dowels as shown on assembly diagram. 

IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR 

KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE 

DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU 

FOR CHOOSING OUR FURNITURE. 

* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE 

0

IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY

7200  Gateway  Court,  Manassas,  Virginia  20109 

Phone. 703-361-7000,  Fax. 703-361-7001