background image

5. Remote control pairing instructions

7. Fault warning light

11

12

If the remote control does not respond or you have 

replaced the remote control, you need to pair it again.
Pairing method: reboot, press and hold the mode button 

on the remote control within 5 seconds.

E01

Software overcurrent

E02

Hardware overcurrent

E03

IPM module overheating 

E04

Undervoltage protection

E05

Overvoltage protection

E06

Motor phase loss protection

E07

Motor locked-rotor protection

E08

Sensor failure 

E09

Motor cannot start

E12

Motor overcurrent protection

E13

Overload protection

E14

Hall signal missing

E15

Communication problem

Auto mode

4. Description of automatic mode control (advanced mode)

This mode is an advanced mode, which is difficult to 

control and can be used completely without the remote 

control. It is recommended for skilled people to use the 

treadmill.
The remote control starts and stops, and the mode 

switch button is effective in this mode.

*

 The automatic mode is only available when the 

treadmill is in walking mode.

The treadmill will start 

or accelerate when 

entering this area in 

automatic mode

The treadmill will 

automatically 

decelerate when 

entering this area in 

automatic mode

5. Trademark and Legal Notice

The patents involved in Kingsmith WalkingPad Treadmill 

series products are made by Beijing Kingsmith Technology 

Co., Ltd. and owned by the Company. No organization or 

individual may copy, distribute all or any part of this manual 

without Kingsmith’s written permission, and may not use 

these patents without authorization.
When printing this manual, we have put various functional 

descriptions and instructions in it as far as possible. 

However, due to the continuous improvement of product 

functions and design changes, there may still be discrep-

ancies with the products you purchased. Due to product 

update, this manual may deviate from the actual product in 

terms of color, appearance, etc. Please refer to the actual 

product.

Not connected to APP

Will flicker

Connected to APP

Off

6. Connection Caution Light

Summary of Contents for WalkingPad TRMC21F













Reviews: