1. Clean the walking machine
• Turn off the machine and unplug the power cord.
• Add several drops of detergent on cotton rag or towel. Don't pour the detergent on the belt
directly, and don't use acid or corrosive cleaners.
• Wipe off dust and stains on the frame, front panel and belt. Do not wipe backside of the belt.
• After using for a period, dust and stains may appear on the back part, that is normal and just
clean them up.
• Press and hold both Mode Switch Button and Acceleration Button on the remote control over
3 seconds.
• The walking belt will move at the speed of 4 km/hr ( 2.5 mi/hr ).
• Running belt inclined left: Turn the left adjustment screw 1/4 circle clockwise.
• Running belt inclined right: Turn the right adjustment screw 1/4.circle clockwise.
• Slipping running belt: Turn the left and right adjustment screws clockwise at the same time a
half circle.
• Run the running belt for a period of time (1~2 minutes) to observe the centering situation. If
necessary, please adjust it again.
• Turn off the machine and unplug the power cord.
• Lift up the belt and apply silicone oil on the backside of the belt.
• Power on the treadmill again to run the running belt at 4km/hr ( 2.5 mi/hr ) for 10-20 seconds.
• 5-10 ml of silicone oil is needed for one time of lubrication.
• If the lubrication is applied too much, the belt will slip and affect normal use.
• Add the silicone oil every 3 months.
6. Maintenance and Service
15
16
Children should be
supervised to ensure that
they do not play with the
Walkingpad.
Please use it carefully
for elders and
pregnant women.
Please keep your sight
horizontal to avoid dizziness.
More than one person
on the Walkingpad is
prohibited.
Using machine with
pet is prohibited
.
Walking sideways on
the machine is
prohibited.
Walking backwards on
the machine is
prohibited.
Trampling the machine
head is prohibited.
Horizontal sight
2. Adjust the belt
3. Lubricate the Belt
5. Safety Notice
