Repeat the new password.
Working Mode Setting.
8. When three digits
are selected,
press
”
*
”
button, the display
window shows
again.
Now must input the new
password. Repeat the same
steps.
9. If the password is the same as
last time, the changed passw-
ord is OK. The new password
is stored into the internal
memory.
10. If the password is not the
same as
last time, and the
display
window
shows
, the station will
ne-
ed to rewrite new password.
(see the last 8-9 step). The
changing of password is
finished until the lately two
passwords are identical.
*Note: The word of password is
0 to 9, ten words. If not ,the
changed password is unsucces-
sful.
If the display window shows
, press and hold the
“
▲”
and
“▼”
buttons simultaneo
usly,
then the display shows
This indicates the unit
comes into working mode
setting state, and pressing
“
▲”
or
“▼”
button will change
X
