To prevent damage to the unit and ensure a safe
working environment, be sure to comply with the
following precautions.
․
Appliance shall only be used with rated voltage and frequency.
(Refer to the trademark back of equipment.)
․
Don’t use or stop the use if the appliance is damaged, especially the
supply cord.
․
This machine is equipped with a 3-wires grounding plug and must
be plugged into a 3-terminal grounded socket. Do not modify plug
or use an ungrounded power socket. If an extension cord is neces-
sary, use only a 3-wire extension cord that provides grounding.
․
Do not use the unit for applications other than soldering.
․
Do not rap the soldering iron against the work bench to shake off
residual solder, or otherwise subject the iron to severe shocks.
․
Do not modify the unit.
․
Use only genuine replacement parts.
․
Do not wet the unit or use and disconnect the unit when your hands
are wet and without to force the supply cord.
․
The soldering process will produce smoke, so make sure the area
is well ventilated.
․
While using the unit, don’t do anything which may cause bodily
harm or physical damage.
․
Children don’t recognize the risks of electrical appliances.
Therefore use or keep the appliance only under supervision of
adults and out of the reach from children.
Names of Parts
