The Password of input is correct
Input New Password
Repeat the New Password
the password of input is error, and the
temperature setting can’t be done.
6.
If the display window shows
, this
indicates the password of input is correct.
After displaying about 4 seconds, the station
comes into normal work state, and the setting
temperature will be admitted.
7.
When display window is showing
,
press * button, and shows
. It
indicates the station comes into inputting new
password state. Pressing
▲
or
▼
button
will change displayed value. See “Set
Temperature Normally”.
8.
When three digits are selected, press * button,
the display window shows
again.
Now must input the new password. Repeat the
same steps.
9.
If the password is the same as last time, the
changed password is OK. The new password
is stored into the internal memory.
10.
If the password is not the same as last time,
and the display window shows
, the
station will need to rewrite new password.
(see the last 8
——
9 steps). The changing of
password is finished until the lately two
passwords are identical.
Note: The word of password is 0 to 9, ten words.
If not, the changed password is unsuccessful.
Working Mode Setting
If the display window shows
, press and
hold the
▲
and
▼
buttons simultaneously, then
the display shows . This indicates the
unit comes into working mode setting state, and
X
