19
Solar System Installation Guide
Manifold Interconnection Kit
When joining manifolds together in series, it is necessary to use the interconnection kit which will support and align
multiple collectors. All manifolds comprise of a male and female connection, enabling manifolds to be connected
directly to one another. Up to four manifolds can be connected in this fashion.
1.
Insert screws into plate ensuring screws do not protrude to upper side
2.
Slide plate approximately half way into channel at bottom of manifold that is fixed to side rails
3.
Tighten up screws to force plate against bottom of manifold (do not over tighten)
4.
Slide channel of next manifold on plate
5.
Push clip all the way down until connection is fully retained
6.
Assemble support rail connection plate to fixed support rails
7.
Assemble retaining plates and fittings
