Kingspan Varisol, Installation Manual

Standard Roof Fixings

The Varisol product range is available with a choice of roof fixing options to suit many roof 

types, see diagram below for the most common fixings. Roof fixings are available for slate, 

tiled, double lap plain clay, metal seam and concrete. For others please contact Kingspan. 

The most common fixings are illustrated and explained in the following section and may be 

easily secured to slate, tile or masonry finishes.

Roof kits and their relevant manufacturer codes:

Horizontal Installations

With any installation where the collector is installed horizontally on a wall façade or roof 

surface; the airvent on the collector manifold must be the highest point of the collector, 

otherwise air in the system will remain in the pipes within the collector tubes and be difficult 

to flush out. Airlocks in the pipes will stop circulation through the system.

When the collector is orientated correctly, i.e. with the manifold slightly higher than the base 

of the collector, (see below) air will be forced back into the system. In this instance the air 

separator will prevent air from circulating.

Roof Kits

3

1

2

5

4

Varisol Installation Manual

05

04

Flat horizontal orientation

(option 4 above)

Wall horizontal installation

(option 5 above)

Minimum 2˚ angle

Minimum 2˚ angle

  Option 

Code 

Description 

1 

KSK0039 

Varisol 10 Sloping Roof Kit

KSK0040 

Varisol 20 Sloping Roof Kit

KSK0041 

Varisol 30 Sloping Roof Kit

KSK0062 

Varisol 10 Bolt Down Roof Kit

KSK0063 

Varisol 20 Bolt Down Roof Kit

KSK0064 

Varisol 30 Bolt Down Roof Kit 

2 

KSK0042 

Varisol 10 A Frame Kit

KSK0043 

Varisol 20 A Frame Kit

KSK0044 

Varisol 30 A Frame Kit

  3, 4 and 5 

KSK0065 

Varisol 10 Façade Kit

KSK0066 

Varisol 20 Façade Kit

KSK0067 

Varisol 30 Façade Kit 

2°

 Min

2°

 Min