Kingston Technology KND1610TX User Manual Download

Page: 20 / 25

Appendix C Specifications

Kingston Technology Company KND2410TX User’s Guide - Rev. A01

Compliance:

IEEE802.3u 100BASE-TX Standard
IEEE802.3i 10BASE-T Standard
IEEE802.3 CSMA/CD Standard

Media Interface:

KND810TX
KND1610TX
KND2410TX

8 auto-negotiating 10/100TX UTP ports
16 auto-negotiating 10/100TX UTP ports
24 auto-negotiating 10/100TX UTP ports

KND810TX KND1610TX KND2410TX

Speed Setting Dip Switches:
[Used to manually configure
the corresponding ports for
10Mbps, 100Mbps, or Auto-
negotiation (default setting)].

Ports 7 & 8

Ports 23 & 24

Diagnostic LEDs:

1 LED for Power Indicator (steady green)
2 LEDs for both 10Mbps and 100Mbps collision detection (flashing amber)
8, 16, or 24 LEDs for 100TX speed detection (steady green)
8, 16, or 24 LEDs for Link (steady green) / Activity (flashing green)

Stacking Cable:

50-pin shielded cable

Additional stacking:

Up to a maximum of four (4) hubs

KND810TX KND1610TX KND2410TX

Uplink port:

Port 8

Port 24

Connection Type:

RJ-45, Female

Cable Type:

UTP 26 to 22 AWG

Cable Grade:
10BASE-T
100BASE-TX

CAT3, 4, 5 or better
CAT5 or better

Max. Cable Length:
Repeater to node
Inter-repeater link
2 Class

Repeaters

100m (328ft)

5m (16.4ft)

Environmental:

Operating Temp.

0°C to 45°C (32°F to 113°F)

Storage Temp.

-20°C to 60°C (-4°F to 140°F)

Relative Humidity

10% to 90% non-condensing

Electrical:

Input Voltage:

100VAC-240VAC, 50/60Hz, auto-sensing internal power supply

Output DC Voltage:

KND810TX / KND1610TX:
KND2410TX:

5 Vdc / 6A
5 Vdc / 11A

KND810TX KND1610TX KND2410TX

Power Consumption:

11.05 Watts max.

19.40 Watts max.

30.00 Watts max.

External Fuse:

250V / 2A maximum

Physical:

Dimension (HxWxD):

KND810TX / KND1610TX:

KND2410TX:

1.70” x 10.45” x 6.3” (43.2mm x 265.5mm x 160mm)
1.70” x 17.32” x 7.88” (43.2mm x 440.4mm x 200mm)

KND810TX KND1610TX KND2410TX

Weight:

3.4 lbs. (1.55 kg)

3.8 lbs. (1.73 kg)

6.2 lbs. (2.81 kg)

Certification:

EMI Standards:

FCC Class A, CE CISPR A, C-Tick

EMC Standards:

EN55022, IEC801-2, IEC801-3, IEC801-4

Low Voltage Directive:

EN60950

Safety Standards:

UL, cUL, TUV

Summary of Contents for KND1610TX


























Search results

Summary of Contents for KND1610TX

Reviews:

Related manuals for KND1610TX

Brands by name

Popular brands

Kingston Technology KND1610TX, User Manual

Search results

Summary of Contents for KND1610TX

Reviews:

Related manuals for KND1610TX

Brands by name

Popular brands