Operation Instructions
：
A. System Power ON
：
Confirmed vehicle’s door closed then connect the wire harness to the Main Unit
after all wiring to vehicle is complete. LED ON and enter the disarming mode.
B. Programming Transmitter
：
(
＊
Factory Default Setting)
(2-programming method)
The system state
1. Disarming
2. Door Unlock
3. Ignition OFF.
4. AUTO or RKE
Programming method I
：
Enter
：
1. Turn Ignition to “ON” position.
2. Press the switch 3 sec until LED flash 3-time then release the switch. You are
now in the Transmitter programming mode.
Program
：
1.
Press any button on the transmitter unit the siren responds with a
confirming chirp and transmitter’s LED flash once. The first transmitter is
now programmed.
2.
Press button on the second transmitter until the siren responds with
2-confirming chirp and transmitter’s LED flash once. The second transmitter
is now programmed.
3.
Apply the same procedure to program 3
rd
、
4
th
、
and 5
th
transmitter.
Exit
：
1.
Programming less than 5 sets code. Turn Ignition to “OFF” position,
2.
Programming 5 sets code the system automatic exit the programming mode
after complete ed program.
3.
If more than 5 transmitters programmed, the system only kept last 5
transmitters.
Programming method
Ⅱ
：
Enter
：
1.
When the door closed. Open/Close door twice kept door closed. After 2
second turn to Ignition switch “OFF/ON” 4 times and stay in “ON” position.
2. After 3-short chirp is hearing. You are now in the Transmitter programming
mode.
Program
：
1.
Press any button on the transmitter unit the siren responds with a
4
Summary of Contents for PKE-C801
Page 9: ...9 ...
