confirming chirp and transmitter’s LED flash once. The first transmitter is
now programmed.
2.
Press button on the second transmitter until the siren responds with
2-confirming chirp and transmitter’s LED flash once. The second transmitter
is now programmed.
3.
Apply the same procedure to program 3
rd
、
4
th
、
and 5
th
transmitter.
Exit
：
1.
Programming less than 5 sets code. Turn Ignition to “OFF” position,
2.
Programming 5 sets code the system automatic exit the programming mode
after complete ed program.
3.
If more than 5 transmitters programmed, the system only kept last 5
transmitters.
Note: Factory default setting , If user need programming transmitter again.
Please confirmed vehicle’s door closed and within 5 seconds turn ignition to
“ON” position.
B.
Active Arming – Lock & Arm
The system state --AUTO
1. Disarming
2. Door Unlock
3. Ignition OFF.
4. AUTO
1.
Transmitter is on AUTO state (Keyless entry function; auto-lock/unlock door)
2.
When transmitter exceeded the compass of area around the vehicle
2-meters over 5 seconds.
3.
The siren/horn will chirp once and parking light will flash once to indicating
that the system is now armed. The vehicle’s door will lock upon arming.
The system state --RKE
1. Disarming
2. Door Unlock
3. Ignition OFF.
4. RKE
1.
Transmitter is on RKE state (Remote control function)
2.
Press
button on transmitter.
3.
The siren/horn will chirp once and parking light will flash once to indicating
that the system is now armed. The vehicle’s door will lock upon arming.
5
Summary of Contents for PKE-C801
Page 9: ...9 ...
