LT03
6
4.2 Basic function-Alarm function
4.2.1 Low Voltage alarm
When the battery power is lower than 10%, the terminal will report a low-voltage alarm to the
platform, and the user needs to charge the terminal as soon as possible.
4.2.2 Speeding, low speed alarm
When the vehicle speed is higher than the overspeed alarm value, the vehicle terminal will notify the
monitoring center. Similarly, when the vehicle speed is lower than the low speed alarm value, a low
speed alarm will be reported to the monitoring center. The alarm value is configurable.
4.2.3 GPS error alarm
When the terminal detects that the GPS/BD module is working abnormally, it reports the GPS
receiver failure alarm to the monitoring center.
4.3 Basic function-Intelligent function
4.3.1 Power save
The terminal has a built-in high-sensitivity G-sensor accelerometer to monitor whether the vehicle is
moving or not. When there is no motion state detected for a long time, the host automatically enters
the power saving state, turns off the GPS/BD module, and the GSM enters the heartbeat upload
state.
4.3.2 Self- diagnosis
The vehicle terminal can perform self-diagnosis. In the event of a fault, it will send a fault notification
to the center, such as GPS, GSM, etc., and can automatically take relevant measures. The monitoring
GPS Talks