7
4.2.9 Air condition status detect and SOS (Default ON)
This device has an extra wire for detecting the air condition status (On/Off) in the
cars or connecting a SOS for emergency alarm, when connect SOS, please make sure
1 wire is connected to the white wire of the device, and another wire is connected to
the red power wire of the device .
4.2.10 GPS error alarm (Default ON)
When the device detects that the GPS/BD module is working abnormally, it reports
the GPS receiver failure alarm to the backend.
4.3
【
Basic function-Intelligent function
】
4.3.1 Power Save (Default 5 mins after static status)
The device has a built-in high-sensitivity G-sensor accelerometer that monitors the
vehicle for motion in real time. When no motion is detected for a long time, the
device automatically enters the power saving state, meanwhile turns off the GPS/BD
module, and GSM enters the heartbeat return mode. In this state, the power
consumption of the device is extremely low, which can save power consumption
from the vehicle battery.
4.3.2 Self-Diagnosis (Default ON)
The device can perform self-diagnosis. In case there is malfunction regarding GPS
and GSM, it will report error message to the backend, and the backend .The backend
can query the current model, version, configuration, running status, and device
functions.
GPS Talks
