MT13
4
LBS
The terminal uses GPS positioning by default. When the GPS enters the blind zone
and cannot be accurately located, the terminal automatically switches to the base
station location. The terminal acquires the base station information every 30S and
uploads the base station information, the server interprets the specific location.
AGPS
The terminal has the AGPS function. When the terminal is connected to the GPRS,
the AGPS function can be used to speed up the positioning speed of the GPS module
and improve the positioning accuracy.
Alarm function
If the SMS alarm function is enabled, the configured number will receive SMS alarms
as well.
Emergency alarm
Press the SOS button, the backend will receive the SOS alarm, to protect the vehicle
from robbery and handle emergency cases
Speeding alarm
When the vehicle speed is higher than the overspeed alarm value, the vehicle
terminal will notify the backend. Similarly, when the vehicle speed is lower than the
low speed alarm value, a low speed alarm will be reported to the backend. The alarm
value is configurable.
GPS Talks