7
3.2.3 Driving behavior alarm (Default OFF)
The device is built in with G-sensor, which can detect speeding, hard deceleration,
hard acceleration and Cornering alarm
3.2.5 Turn over alarm(Default OFF)
If someone turn over the device, it will report an alarm.
3.2.6 Vibration alarm (Default OFF)
The device supports vibration alarm, 10 minutes after the ignition off (Arm range
1-20 minutes), the device generates vibration (Delay range 1-10 mins) without ACC
connected, the device will upload vibration alarm.
3.2.7 Towing alarm (Default OFF)
An alarm is generated when the device is set to a displacement of more than 100
meters (message mode prompt), and the alarm information is reported when the
displacement radius exceeds 100 meters when the device is turned off. (Note:
displacement range 100~2000m).
The device will send SMS if the vehicle is moved in ignition off status, if the radius is
more than 100 meters, will upload towing alarm (Towing range:100-2000m).
3.2.8 Wire cut off alarm (Always On)
The device is allowed to connect a power off relay for power and fuel cut off
function in case a car stolen happens, a command can be sent to the device to
remote cut off the fuel and power, please note only the preconfigured center
number can send such command.
