DCP 30/70 L / DCP 30/70 S / DCP 30 LX/SX
Issue: 11/2009
38
4 .3 .1 .2 Focusing
Focusing can be done manually or remotely.
Focusing remotely is only possible if the lens holder is equipped with a focus motor (red
arrow in lower figure).
X
NOTE
With remotely controlled focusing manual focusing should only be done in case of need.
Preparation for focusing:
• Switch on projector and xenon lamp.
• Project a suitable test pattern or content.
Focusing manually
• Turn the adjusting knob (arrow)
clockwise or counterclockwise to set
the focus to plus or minus.
Focusing remotely (option)
Set the focus by pressing the focus
buttons on the button panel. The
focusing motor (arrow) moves the lens.