20
•
Right click "ITeX K2 ADSL NIC" and click "Remove". Click "OK" when
prompted with a warning about removing and adapter. Click "OK" to close the
Systems window.
To uninstall the test application:
•
From the Start menu, select "Programs", select "ITeX ADSL", select "Uninstall
ADSL", then click on the "Uninstall Test Application”.
11. SPECIFICATIONS
−
Compliant with ANSI T1.413 Issue 2, ITU G.992.1(G.dmt), ITU G.992.2(G.lite),
UAWG 1.0
−
Compatible with full rate T1.413 DSLAM (Alcatel ) at central office (CO) side.
−
DMT (Discrete Multi-Tone) modulation
−
Splitterless operation
−
Full rate operation with downstream up to 1.5Mbps and upstream up to
512Kbps
−
Rate adaptive at 32 Kbps steps depending on the line condition
−
Up to 18Kft loop reach
−
Support for Windows 95/98/2000 and Windows NT4.0
−
Full ATM protocol stacks implementation over ADSL, ATM TC layer, ATM
layer with traffic shaping, AAL layer(AAL5 & SAR), IP over ATM, RFC
1483/1577,PPP over ATM
−
Software upgradable
−
Performance scalable, based on host processor
Interface :
−
32 bits 33MHz PCI interface, PCI 2.2 power management, Plug and Play
−
RJ-11 port x1 for Line
−
RJ-11 port x1 for Telephone
System Requirement:
−
Pentium II processor, Windows 95/98/2000 and NT 4.0, 64M RAM
Physical Dimensions:
−
Width : 18.4 mm
−
Height : 107 mm
−
Depth : 160 mm
Operating Temperature :
32 - 104 F ( 0 - 40 C)