250GK (double-seat): Ownr`s Manual
17
sure there is no brake fluid leakage.
Engine Stop Button
: When engine is running, press and hold the Engine Stop Button for two
seconds to make sure the engine stops.
Steering Wheel
: Check that the wheels turn properly as you turn the steering wheel.
Cable
: Check the cable housing for wear.and the fittings for looseness,replace or tighten them if
needed.
Add water:
1. Confirm joints of water pipes have been installed correctly firstly. Open the water filling cover to
fill water until it is full.
2. Start the engine after adding water completes. Rotate speed of the engine shall be controlled under
4500RPM. Until warming-up finishes, bubble appears on the water filling opening and the water
level begins to reduce, at the same time, antifreezer shall be filled. After several times filling, no
bubbles occurs, and add more water until it is full, then close the water filling cover.
3. Add specified antifreezer into the auxiliary water tank, with water level between the lower and
upper marks.
4. Caution: the outlet water pipe is located at upper locations of the water tank and the return water